. This LCD screen is the 632 LCD screen from Crystal Fontz with USB connection.It has 2 lines with Yellow/Green LED Backlight and it's STN Negative, Blue. The USB connection makes the installation easier because you only need one cable for both power and data. The serial LCD modules need 2 cables, one for data and one for power. The USB version is fully compatible by using a 'Virtual COM port" driver.
| CrystalFontz 632 USB LCD screen Feature
list |
|
The LCD material
for the positive displays is FSTN (Film compensated Super
Twisted Nematic) instead of STN. FSTN gives better contrast,
faster response and makes an all-around more readable
display.
|
|
The display
has the ability to store a customized boot screen of your
design in its EEPROM. All features of the display are
controlled: characters displayed, user-definable characters,
backlight setting, contrast setting, cursor position,
cursor style, “wrap” setting, “scroll” setting, and even
the scrolling marquee.
|
|
The CGROM
is an enhanced version with many more useful characters:
numeric superscripts, icons, mathematical symbols, some
fractions, a great variety of arrows, many currency symbols,
and more.
|
|
Available
with 632 PC Mounting
Bracket
|
|
Large, easy
to read characters: 7.3mm (0.287") character height
|
|
Available
with bright, even, software adjustable LED backlighting
or in a low-power reflective model
|
|
Software controlled
contrast
|
|
"Gapless"
horizontal bargraphs
|
|
Software controlled
terminal style automatic scrolling and line wrapping
|
|
Unique "Scrolling
Marquee" feature continuously scrolls a message across
the display without host intervention.
|
|
Buffered communication
|
|
Single board
construction--no connectors to fail
|
|
Large display
area in a compact 108mm x 43mm (4.25" x 1.69") package
|
Thin:
- Reflective
is 15.9mm (0.626") including DB-9 connector
- LED Backlit
is 19.9mm (0.783") including DB-9 connector
|
|
The USB converter
board and its compact connector does not add to the overall
thickness of the module.
|
|
Negative voltage
for contrast generated on board
|
The LCD screen came well packed in a box within a sheet of bubble plastic. In the package I also found the additional
From left to right : on the first pic you can see the LCD screen. Without being powered up it looks dark blue. The second pic is the PCB plate on back of the screen. On the right you can see 2 little switches, they are used to config the baud rating of the LCD screen. Even more to the right you have a serial connector, and in the lower middle you have an extra PCB plate which is used for the USB connection. On picture number three you can see the USB connector.
From left to right : On the first picture you have the black mounting bracket. It consists out of an iron bracket with a black adhesive plastic front attached to it. Also note that it has a clear plastic to protect the screen of your LCD module. On the second pic you can see the back of it and the screws to mount the LCD screen. On the third pic the LCD screen mounted in the mounting bracket. And on the last picture you can see the back of the bracket with the LCD screen installed. Installing it is really simple.
