Abit Fatal1ty FP-IN9 SLI motherboard

Posted on Thursday, Feb 08 2007 @ 11:20 CET by Thomas De Maesschalck
The Abit Fatal1ty FP-IN9 SLI is a new motherboard for the Intel platform. It uses the NVIDIA nForce 650i SLI chipset and supports LGA 775 Intel CPUs.

There's support for 1066MHz FSB processors, dual-channel DDR2 800MHz memory, dual PCI Express x16, SATA 3G RAID, Gigabit Ethernet and 7.1 CH HD Audio.

Some other special features where Abit is proud about:
  • Solid State capacitors for better performance and durability.
  • 100% Japanese caps, high quality.
  • An onboard on/off switch for DIY testing. Allows you to test the board without short-circuiting the wrong pins.
  • Silent North and South bridge cooling.
  • Factory overclocked, supercharged system bus.
  • Optimized networking with NVIDIA FirstPacket technology.

  •  CPU
    • Supports LGA775 Intel Core2 Duo, Core2 Quad, Core2 Extreme, Pentium Dual-Core, Pentium Extreme Edition, Pentium D & Pentium 4 Processors with 1066/800MHz FSB
    • PWM Designation provides high quality, efficient power
    • NVIDIA nForce 650i SLI
    • 4 X 240-pin DIMM sockets support max. memory capacity 32GB
    • Supports Dual channel DDR2 800/667/533 Un-buffered Non-ECC memory
    • Native Gigabit Ethernet controller supports 10/100/1000Mbit LAN connections
    • 7.1 CH HD Audio CODEC
    • Supports Auto Jack Sensing and optical S/PDIF Out
     Expansion Slots
    • 2 x PCI-E X16, 2 x PCI-E X1, 2 x PCI
     Internal I/O
    • 1 x Floppy Port supports up to 2.88 MB
    • 2 x ATA 133/100/66/33 IDE connectors
    • 4 x SATA 3Gb/s connector
    • 2 x USB header (supports 4 additional ports)
    • 1 x FP-Audio
    • Quick Power On & Reset buttons
     Back Panel I/O
    • 1 x PS/2 Keyboard, 1 x PS/2 Mouse
    • 1 x S/P DIF Out
    • 7.1 CH Audio connector (Front, Line-in, MIC-in, Center/Subwoofer, Surround, Rear Surround)
    • 4 x USB 2.0, 1 x RJ-45 LAN connector
     Serial ATA
    • NVIDIA NF430: 4 x SATA 3Gb/s supports NVIDIA MediaShield RAID with SATA RAID 0/1/0+1/5 and JBOD
    • 100% lead-free process and RoHS compliant
    • Driver CD x1
    • English Manual x1
    • IDE cable x1, FDD cable x1, SATA cable x4
    • I/O Bracket x1, SLI Bracket x1
    • SLI Bridge Card x1
     Form Factor
    • ATX form factor 305 x 245mm
    • PCB Color: Red
     abit Engineered
    • 100% Japanese Capacitors
    • Low ESR, high ripple, conductive polymer aluminum solid state capacitors in all high frequency areas
    • Quick Power On & Reset buttons
    • Silent Cooling

    About the Author

    Thomas De Maesschalck

    Thomas has been messing with computer since early childhood and firmly believes the Internet is the best thing since sliced bread. Enjoys playing with new tech, is fascinated by science, and passionate about financial markets. When not behind a computer, he can be found with running shoes on or lifting heavy weights in the weight room.

    Loading Comments