Micron 34nm SSD with 6Gbps SATA reaches 355MB/s

Posted on Thursday, December 03 2009 @ 23:10 CET by Thomas De Maesschalck
Micron introduced the RealSSD C300, the first solid state disk with ONFI 2.1-compliant 34nm MLC NAND flash memory and the 6Gbps SATA interface. The disk reportedly features a new proprietary controller and firmware designed in cooperation with Marvell and 256MB DDR3 cache memory. All these improvements should result in read speeds of up to 355MB/s and write speeds of up to 215MB/s.

The Micron RealSSD C300 will be released in Q1 2010, there will be 1.8" and 2.5" disks with capacities of 128GB and 256GB.
Micron Technology, Inc. (NYSE:MU) has raised the performance bar for SSDs. The company today announced its RealSSD C300 SSD, the industry’s fastest for notebook and desktop PCs. Micron’s new RealSSD C300 drive enables users to enjoy a more powerful and responsive computing experience—including faster operating system (OS) boot and hibernate times, and speedier application load, data transfer and file copying. To see a video demonstration of the performance advantages achieved when using Micron’s RealSSD C300 drive, visit https://www.youtube.com/watch?v=dqnL3jX3dik.

“The C300 SSD not only delivers on all the inherent advantages of SSDs – improved reliability and lower power use – but also leverages a finely tuned architecture and high-speed ONFI 2.1 NAND to provide a whole new level of performance,” said Dean Klein, vice president of memory system development at Micron.

While benchmark tests have shown that the C300 SSD is the fastest PC SSD leveraging the industry standard SATA 3Gb/s interface, the SSD performance is further boosted by natively supporting the next generation high-speed interface – SATA 6Gb/s.

What Does SATA 6Gb/s Mean? It’s All in the Numbers.

Native support of SATA 6Gb/s means that the data path between the host computer and the SSD is twice as fast as the previous SATA 3Gb/s interface. While some drive architectures require a trade-off between throughput-sensitive and IOPS (Input/Output Per Second)-sensitive data streams, Micron’s core design and higher speed interface provides advantages for both. The C300 SSD leverages the SATA 6Gb/s interface to achieve a read throughput speed of up to 355MB/s and a write throughput speed of up to 215MB/s. Using the common PC Mark Vantage scoring system, the C300 SSD turns in a score of 45,000 from the HDD Suite. To see a Micron C300 SSD competitive performance benchmark video, visit www.micronblogs.com.

“Hard drives gain little performance advantage when using SATA 6Gb/s because of mechanical limitations,” said Klein. “As a developer of leading-edge NAND technology, along with our sophisticated controller and firmware innovations, Micron is well positioned to tune our drives to take full advantage of the faster speeds achieved using the SATA 6Gb/s interface. The combination of these technology advancements has enabled the RealSSD C300 drive to far outshine the competition.”

Designed Using Micron’s Industry-Leading 34nm NAND Flash Memory

The RealSSD C300 drive leverages Micron’s established 34nm MLC NAND flash memory, allowing the company to provide a cost-competitive, high-capacity SSD solution. Bringing another first to SSDs, Micron’s 34nm MLC NAND supports the high-speed ONFI 2.1 standard, ensuring the NAND performance keeps pace with the faster SATA 6Gb/s interface.

The drives will be available in 1.8-inch and 2.5-inch form factors, with both drives supporting 128GB and 256GB capacities. Micron is currently sampling the C300 SSD in limited quantities and expects to enter production in the first quarter of calendar 2010.


Here are three video demonstrations that shows you how fast this SSD is:









About the Author

Thomas De Maesschalck

Thomas has been messing with computer since early childhood and firmly believes the Internet is the best thing since sliced bread. Enjoys playing with new tech, is fascinated by science, and passionate about financial markets. When not behind a computer, he can be found with running shoes on or lifting heavy weights in the weight room.



Loading Comments