Toshiba announced it now offers 32nm Toggle Mode NAND with MLC versions of 64Gb, 128Gb and 256GB and SLC versions of 32Gb, 64Gb and 128Gb.
Toshiba America Electronic Components, Inc ., (TAEC)* is introducing 32nm double data rate Toggle Mode NAND, in multi-level cell (MLC) versions with densities of 64Gb1, 128Gb and 256Gb and single-level cell (SLC) versions with densities of 32Gb, 64Gb and 128Gb. Toggle Mode NAND features a faster interface than conventional or “legacy” asynchronous NAND memory with lower power consumption than competing synchronous DDR NAND product offerings.
Toshiba DDR Toggle Mode 1.0 NAND has a fast interface rated at 133 megatransfers/second2 (MT/s), compared to 40MT/s for legacy SLC single data rate NAND, which makes it suitable for high performance solid state storage applications including enterprise storage. Since it uses an asynchronous interface similar to that used in conventional NAND, the Toshiba DDR Toggle Mode NAND requires no clock signal, which means that it uses less power and has a simpler system design compared to competing synchronous NAND alternatives. The DDR interface in Toggle Mode NAND uses a Bidirectional DQS to generate input/output signals (I/Os) using the rising and falling edge of the write erase signal. Toggle Mode NAND also has on-die termination to help achieve less crosstalk.
Scalability to future high-frequency operation is enabled as a result of the bi-directional data signal. Toshiba recently announced a commitment to a new standard for the most advanced high-performance NAND flash memory, a DDR NAND flash with a 400Mbps3 interface. This next generation Toggle Mode DDR NAND 2.0 is targeted to provide a three-fold increase in interface speed over Toggle DDR 1.0 and a ten-fold increase over the 40Mbps single data rate NAND in widespread use today.
Toshiba Toggle Mode NAND supports common legacy NAND commands including basic, multi-plane and cache operations.