Samsung Electronics Co., Ltd., the world leader in advanced memory technology, announced today that it has begun mass producing a high-performance, low-powered PCIe* solid state drive (SSD), the SM951, for use in ultra-slim notebook PCs and workstations.
“We are helping to accelerate growth of the ultra-slim notebook PC market with the introduction of this energy-efficient, high-speed PCIe SSD,” said Jeeho Baek, Senior Vice President of Memory Marketing at Samsung Electronics. He added that, “We will continue to introduce next-generation high-density SSDs with improved performance and increased differentiation, as we further strengthen our business competitiveness in global SSD market.”
The SM951 boasts outstanding performance, supporting both PCIe 3.0 and PCIe 2.0 interfaces. For use in the latest ultra-slim notebooks, it can read and write sequentially at 1,600MB/s (megabytes per second) and 1,350MB/s respectively based on PCIe 2.0. This performance level is approximately three times faster than that of the latest SSD with a SATA interface and about 30 percent faster than that of the Samsung XP941, its predecessor. In addition, the new SSD’s random read and write speeds reach up to 130,000 and 85,000 IOPS (inputs/outputs per second) respectively.
For ultra-slim notebooks and workstations wanting to adopt the PCIe 3.0 interface, the SM951 can read and write sequentially at 2,150MB/s and 1,550 MB/s respectively, which would provide approximately four times faster sequential reading performance compared to current SATA SSDs. With a PCIe 3.0 interface, the drive achieves substantially higher energy efficiency, requiring only about 450MB/s per watt for sequential reading and 250MB/s per watt for sequential writing, which translates into a more than 50 percent of improvement in performance per watt over that of the XP941 SSD.
In addition, the SM951 is the first SSD to adopt the L1.2 low power standby mode (which allows all high-speed circuits to be turned off when a PC is on sleeping or in hibernation) as defined by PCI-SIG (the PCIe standards body). By embracing the L1.2 level of standby operation, the SM951’s power consumption is drastically reduced – to under 2mW, about a 97 percent decrease from the 50mW consumed using a L1 state.
Samsung’s SM951 comes in the M.2 form factor (80mm x 22mm), which is only about one seventh the size of a 2.5 inch SSD. Also, it weighs approximately six grams. The drive’s compactness is well suited for most notebook PC designs, freeing up space for other components including the battery. The SM951 lineup consists of 512, 256 and 128GB SSDs.
With its SM951 and other Samsung PCIe SSDs using a 10-nanometer class** MLC NAND flash production platform, Samsung believes it is in an excellent position to rapidly expand the global PCIe SSD market. Samsung will also work on timely introduction of next-generation PCIe SSDs that support the NVMe*** interface, which will provide even further performance increases.
Samsung mass producing PCIe 3.0 solid state disk
Posted on Wednesday, January 07 2015 @ 15:24 CET by Thomas De Maesschalck
Samsung announced it's now mass manufacturing the SM951, a four-lane PCI Express 3.0 solid state disk to be available in 128GB, 256GB and 512GB capacities. The disk is expected to show up in high-end laptops and workstations, it promises read speeds of up to 2150MB/s, write speeds of up to 1550MB/s and random read/write IOPS of 130,000 and 85,000, respectively.