Cooler Master MasterAir MA410M has RGB LEDs that respond to CPU temperature

One complaint from users who don't like RGB LEDs is that they're not useful. Cooler Master changes this a little bit with its MasterAir MA410M, this new processor cooler has RGB LEDs that can change color based on the CPU temperature. To achieve this, Cooler Master integrated a thermal sensor in the base of the cooler.

The heatsink is compatible with Intel LGA 2066 / 2011-v3 / 2011 / 1151 / 1150 / 1155 / 1156 / 1366 and AMD AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 processors. It measures 111.8mm x 130.9mm x 165.1mm (L x W x H) and weighs 820g. It has four direct-touch heatpipes with a diameter of 6mm, a large aluminium fin array with a hexagon "hologram" cutout for unique color lighting effects, and a Dual MasterFan MF120R. This PWM fan offers up to 53.38CFM, maximum air pressure of 1.65 mmH2O, and a noise level of maximum 31dBA.

PUSH-PULL FAN CONFIGURATION
To avoid dynamic losses and help accelerate heat exhaust, the push-pull MasterFan helps pulling heat away faster from heatsink.

AIR-GUIDE ARMOR
Specialized armor designed to guide the flow of air for peak cooling performance and reduce dead heat spots on the cooler. The armor is also illuminated by 28 addressable rgb LED's for full color customization.

HEXAGON HOLOGRAM ALUMINUM FIN
Aluminum hexagon fin cutout that creates a unique hologram lighting that can be seen through the top of the cooler. The specialized aluminum fin design dissipates heat faster for maximum cooling efficiency.

Thermal Detection
The CPU temperature is detected by the thermal sensor and displayed through color lighting. When the CPU runs at max load the color will change to red and the color will be blue at idle or normal load.

Wired Addressable RGB Controller
A compact size Addressable RGB LED controller that allows you to easily customize your RGB devices without the need for either an RGB capable motherboard or software. You can have the colorful rig you’ve always wanted with just the touch of a button.

CDC 2.0
4 heatpipes with Continuous Direct Contact Technology 2.0 Comparing to its previous version CDC 1.0., CDC 2.0 creates 45% more contact surface area on cooler base by compressing heatpipes together. It significantly increases heat dissipation capability and outperform its predecessor.

The MasterAir MA410M will be sold in retail stores for $59.99, it has a five year warranty.