Posted on Wednesday, June 03 2020 @ 14:00 CEST by Thomas De Maesschalck
ThermalTake shows off three Toughpower PF1 80 PLUS Platinum power supplies. Later this month, this series will hit the retial market in 650W, 750W, and 850W editions.
Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, proudly introduces the brand new Toughpower PF1 80 PLUS Platinum 650 W / 750 W / 850 W Power Supply Units.The Toughpower PF1 Platinum Series has a fully modular cable design with a compact size of 150 mm(W) x 86 mm(H) x 140 mm(D).Thermaltake also strikes to provide the trendiest technology that would aid and improve the users’ experience; by doing so, we have incorporated the newest technology by manufacturing single - sided SMD on the PCB, which can reduce heat accumulation and increase the overall performance of the power supply unit.The fully modular series is equipped with Smart Zero Fan to minimize undesired noise, under 30 mV low ripple noise design to reduce electricity waste, and 100 % Japanese made capacitors to ensure reliability.The PSU voltage regulation is set to no more than plus or minus 2 percent for major rails to deliver higher standards than Intel’ s Specification.Thermaltake also makes sure the PSU will provide at least 16 ms hold up time to prevent the system from rebooting or resetting.If users are looking for a compact and steady, high - quality power supply unit, take a look at the Toughpower PF1 80 PLUS Platinum Series power supply units.
Features of the Thermaltake Toughpower PF1 Platinum Series:
Single Side SMD PCB Board Design
> The new design of the PCB allows all SMDs to sit on the top side of the PSUs PCB.This design not only prevents heat accumulation at the bottom of the PSU but also allows cold air to pass through with the 120 mm Hydraulic Bearing Fan covering the entire set of components, keeping the PSU’ s temperature low.
Smart Zero Fan
Smart Zero Fan ensures zero noise when the fan operates below 20 % workload to minimize audible noise.The fan will work when the power supply workload over 20 % .There is also a switch for those who prefer the fan to spin continuously.
Below 30 mV Low Ripple Noise
All ripples are lower than 30 mV for high stability on + 12 V, +5 V, or + 3.3 V from 0 % to 100 % load to ensure high - quality power supply.Low ripple noise will keep your critical components, such as high - end graphics cards, to operate longer in a reliable way.
Extremely Strict Voltage Regulation under Plus or Minus 2 %
The PSU voltage regulation is set to no more than 2 % deviation for major rails to deliver higher standards than 5 % of Intel’ s Specification.
100 % High - Quality Japanese 105° C / 221° F Capacitors
100 % high quality 105° C(221° F) Japanese made capacitors which significantly improve the durability and offer the highest stability and reliability.
80 PLUS Certified
The 80 PLUS for PF1 ARGB Platinum Series delivers up to 92 % efficiency under real - world load conditions to promise lowest power losses.
