CoolerMaster Hyper6 review
Introduction
Finally, we are back with a new review. This time, we’re going to talk about the new cooler from Coolermaster, the Hyper6 cooler.
The last year Coolermaster introduced a series of a new coolers like the Aero 7, Jet 7, Xdream Se, … . These were all good coolers, so we have big expectations for the Hyper6. Let’s begin reviewing!
First impression – what do you get ?
You get a nice box, which is easy to open. Once opened, what do you get? Here is a little list :
The Hyper6 heat sink
A Retention Module
A Back Plate
2 spring clips
1 fan
4 screws for P4
2 screws for K8
4 screws for the fan
Thermal grease
When I first had the stuff in my hand, the weight impressed me. Should this be good or bad? Well, we’ll see later on.
Features and specifications
Features
Six embedded heat pipes that provide heat conduction
Special heat sink design
Raised base design to avoid interfering with components surrounding the CPU such as capacitors
100% copper fins and a special welding technique enables perfect connections between fins and pipes
High-density fins provide a large surface area for heat dissipation
Users can choose to use an 8cm fan with higher speed that provides greater cooling performance
Suitable for all K8 and P4 CPU’s
Specifications
Socket Type: AMD K8 (socket 754/940) and Intel P4 (Socket 478)
Heat Sink dimension : 96 x 82 x 120 mm
Heat sink material: 6 heat pipes + 100% copper stacked fin with copper base
Application: P4 all frequencies and K8
Fan dimension: 80 x 80 x 25 mm
Fan speed: 1800 ~ 3000 rpm
Fan life expectance : 30,000 hrs
Bearing type : Sleeve bearing
Voltage rating: 6 ~12 V
Noise level: 21 ~ 34 DB(A)
Connection : 4 Pin (power input), 3 Pin (speed detection)
Installation
The installation is rather easy. You get an installation guide, which is easy to follow. The only thing that I have to search, was how to get the screws in the fan. You must press a little bit on the screws to get them half-in. But overall, it was very easy to install.
Testing
Test system :
CPU : Intel Pentium 4 2.6GHz
Memory: 2x 512 MB RAM
Graphics card: Geforce 4 128 MB
HDD: 120 GB
OS : Windows XP with SP1
Now, let's take a look at the heat sink. The fins were done really well. They're completely intact with the copper block and the air comes through better than with other CPU Coolers I got.
I do not completely like the fan, because it makes a lot of noise. But you can always use a more silent fan of your collection. With another fan on it, it’s really more silent.
The Hyper6 cooler really reduces my temperatures. 5° lower than with my previous cooler idle, and 4° in load.! Good job Coolermaster.
Conclusion
Coolermaster impresses us again. A very good new cooler, only the noise level is a bit too much. The rather heavy heatsink has proven its quality, so as Coolermaster did again.
The Hyper 6 from Coolermaster receives a 8/10 from Dvhardware.
Finally, we are back with a new review. This time, we’re going to talk about the new cooler from Coolermaster, the Hyper6 cooler.
The last year Coolermaster introduced a series of a new coolers like the Aero 7, Jet 7, Xdream Se, … . These were all good coolers, so we have big expectations for the Hyper6. Let’s begin reviewing!
First impression – what do you get ?
You get a nice box, which is easy to open. Once opened, what do you get? Here is a little list :
When I first had the stuff in my hand, the weight impressed me. Should this be good or bad? Well, we’ll see later on.
Features and specifications
Features
Specifications
Installation
The installation is rather easy. You get an installation guide, which is easy to follow. The only thing that I have to search, was how to get the screws in the fan. You must press a little bit on the screws to get them half-in. But overall, it was very easy to install.
Testing
Test system :
CPU : Intel Pentium 4 2.6GHz
Memory: 2x 512 MB RAM
Graphics card: Geforce 4 128 MB
HDD: 120 GB
OS : Windows XP with SP1
Now, let's take a look at the heat sink. The fins were done really well. They're completely intact with the copper block and the air comes through better than with other CPU Coolers I got.
I do not completely like the fan, because it makes a lot of noise. But you can always use a more silent fan of your collection. With another fan on it, it’s really more silent.
The Hyper6 cooler really reduces my temperatures. 5° lower than with my previous cooler idle, and 4° in load.! Good job Coolermaster.
Conclusion
Coolermaster impresses us again. A very good new cooler, only the noise level is a bit too much. The rather heavy heatsink has proven its quality, so as Coolermaster did again.
The Hyper 6 from Coolermaster receives a 8/10 from Dvhardware.
Added:
Product reviewed: CoolerMaster Hyper6
Reviewer: LORDrazer
Score: 8/10
Thanks. Your comment is waiting for moderation.
Your comment was published.
Human verification failed. Please try again.
Check your name and comment, then try again.
That name is reserved. Please choose another.
what a F*cked up review. No comparisons to other coolers No before/after temperature readings No tests on overcloked systems? WTF?
Replyseriously... what the fuck. Do a real review man, don't slap together some bullshit in 10 minutes
ReplyDid you leave out the comparison? You didn't mention what cooler you used previously.
ReplyWTF isn't this more of a preview than a review ?
Replyhalf-assed review wtf kinda temps were you runnin before this?from what we can read you might be a dumbass and think 60 c is ok. you spoke about weight how damn heavy is it? got to remove the mb to install, due to back-up plate? if this is your idea of a review , don't fuckin bother!
ReplyWow this gives me absolutely no relative info about this HSF. ......
Replywhat the fuck what type of review is this ?
Replyis this a review or a preview? after reading it, I will leave this site wanting MORE INFO!
Replywhat do u expect from someone who goes by "Dark Vision"? LOL
Replyvery strange, its all good and well you saying its a good cooler. But shit, it would be nice to have some real life results, as in temps!
ReplyHahahah "Its better then my last cooler" MUHahahha What a review!! =))
Replyoh shut the fuck up guys. this guy did a gr8 job with his preview, now he'll give us a review in about 20 years
Replypore info cpu cooler why not test a future cooler with last future cpu s no 2600gz pl
ReplyNow running it's replacement, the hyper6+ Base system: S939 3200+ AMD64 4 x 512DDR400 Stock Ram (Copper heatsinked) Asus A8NSLI Single Nvidea PCI-E (Cheap [out of a compaq high-end workstation], but waitng to get decent dual SLi's) 7 HDD's 2 SCSI for boot/temp, 5 s-ata for data. Partially raided. 900gb total usuable. Coolermaster Stacker case, Cross flow fan, dual 550w Hyper PSU's. Not overclocked, but will be testing when decent GPU's present. PC is used for data dumps, internet, video editing and some gaming. The Hyper6+ runs the CPU at 28deg startup, 29 or 30 deg normal use, 32 deg on full continuous load. Without crossflow fan, mobo sits @ 35deg. With cross flow fan on med speed (high speed is noisy), mobo sits @ 30deg. Overall very happy, not that easy to install but it does work well, even with only one 10cm fan. Be warned, you do need a large case to allow for it. Noise is reasonable to loud, the CPU 10cm fan didn't really add to the other fans (3 x 10cm, 1 x 8cm exhaust, 30cm crossflow and PSU fans) I know water cooled may be quieter, but this thing can take alot of grief before giving me grief. Not cheap but a worthwhile investment.
Reply