 |
|
Who's Online
|
There are currently 178 people and 0 DV-member(s) online.
|
|
|
|
|
RSS
|
 |
|
|
|
| |
Overclocking the EVGA 790i SLI FTW was very similar to the Striker II Extreme. Both boards reacted similarly when pushed with a quad core CPU and high speed DDR3 memory. Overclocking the memory takes a little patience but can be done. On this board I was able to push the test memory to 2100MHz but just could not find the stability I needed. 2000MHz was where the memory would really play nice with the CPU and board. When the memory is run unlinked from the CPU there is a performance hit so I found the best compromise between the memory and CPU at 1800MHz (450MHz on the CPU and 900MHz on the memory) Linked and Synced. When run in this configuration the performance is superior to when the memory is run unlinked. I found this configuration to be Prime stable for everyday use. This means no blue screens or lockups to eventually cause hard drive corruption. In all, it took a couple of hours worth of testing the memory to reach the speeds the overclocked benchmarks will be run at. The only issue I have is that the adjustments are much courser than those of the S2E. Even so, the results are similar.
Link: Overclockersclub
|
|
|
|
|
